How To Reset Nespresso Gran Lattissima?

27.03.2023 Sara Olander 0 Comments

Restore Factory Settings – Do you want to restore default settings Nespresso® on your Nespresso Lattissima®? Follow the instructions below. Turn on the machine Hold the power button for 5 seconds while the machine is on. The buttons will blink 3 times indicating that your machine has been restored to factory settings.

Contents

1 How do I get my gran Lattissima out of descaling mode?
- - 1.0.1 Is there a reset button on Nespresso machine?
- 1.1 How do I factory reset my Lattissima one?
  - 1.1.1 How do I reset my Nespresso machine after descaling?
2 Why is my descaling light still on after descaling Nespresso Lattissima?
3 How do you reset a one touch Nespresso machine?
- 3.1 Does unplugging Nespresso reset it?

How do I get my gran Lattissima out of descaling mode?

Descaling and cleaning alert blink. Machine is in menu mode, press simultaneously hot milk and flat white buttons for 3 seconds to exit menu mode or wait 30 seconds to exit automatically.

Is there a reset button on Nespresso machine?

Reset to factory settings Close the head. Leave the lever in ‘UNLOCKED’ position. Push the button 5 times within 3 seconds. The button will blink slowly 5 times to confirm reset is done.

How do I factory reset my Lattissima one?

Restoring quantity to factory settings Press the milk button for 3 seconds to enter Menu mode: descaling and clean alert start blinking. Press the milk button. The milk button blinks to indicate reset mode. Press it to confirm.

How do I reset my Nespresso machine after descaling?

Reset to factory settings NOTE: Choose special function by pressing the lever down: 1 time for ‘Descaling’.2 times for ‘Emptying the system’.3 times for ‘Reset to factory settings’. Turn the machine ‘OFF’ by pushing the lever down for 3 seconds.

Why is my descaling light still on after descaling Nespresso Lattissima?

I descaled my machine, but the descale light has not gone out. Why has this happened? FAQ ?,,

Faq Page

The descale process was not recognised by your machine. A process may have been skipped or carried out too quickly. Assuming you have already run descaler through the machine please carry out the following steps to resolve this *, -Ensure the tank contains at least two inches of water.

-Place a jug underneath your steam valve and open the steam valve FULLY.
-The machine will stop when the tank is empty.
-Close the steam valve.
-Remove your water tank and add at least two inches of water again.
-Place it back into the machine.

-Open the steam valve fully again. This time the water will run straight through the machine without pause. -Once the tank is completely empty close the steam valve and the machine will turn itself off. -Refill the tank and turn the machine back on. The descale light will now be off and you will be able to make coffee again! *IMPORTANT : Only use this solution when you have descaled your machine.

Not descaling your machine regularly can result in breakdown of the appliance.
If you do not descale your machine regularly your product warranty may become invalid.
Descaling your bean to cup machine is one of the most important things you can do to maintain your machine and ensure longevity of your product.

: I descaled my machine, but the descale light has not gone out. Why has this happened? FAQ

Why is my Nespresso descaling light still on after descaling?

Go through the descaling process – Remove the water tank from the machine. Fill it half full of water and place it back in the machine. Start the descaling process. Place a container of at least 1.5L under the hot water and coffee spouts and press ‘OK’ to start the descaling process.

The machine now starts the descaling process, which takes 20 to 30 minutes. As soon as the message ‘Fill water tank’ appears, rinse the water tank under the faucet and then fill it with water. Empty the container and place it under the hot water spout again. Press ‘OK’ to resume descaling. The machine will now rinse with water.

When the rinsing cycle is complete, fill the water tank again with fresh water. The descaling light will now turn off. : How do you turn off the blinking descaling light on your fully automatic?

Why won t the descale light go off?

The water reservoir is full. – When the Keurig descale light stays on, it is often because the water reservoir is full. This is because the descaling process requires water, and it is the water reservoir that contains the water. If the water reservoir is complete, then the descaling process won’t be able to start, and the light won’t turn off.

Why is my Nespresso Lattissima blinking orange?

Descaling alert blinks orange and warm milk froth steady light. Machine is in Descaling mode. Press warm milk button to start descaling process.

Does unplugging Nespresso reset it?

Download Article Download Article All Nespresso models—there are more than a dozen of them!—allow you to customize the serving size of your espresso or other coffee drink, as well as adjust the auto shut-off time. If you want to restore the serving sizes and shut-off time to the model’s factory settings, you must do a factory reset.

1 Turn the machine off if it is currently on. To turn your Citiz or Essenza Mini model off immediately, press both the Lungo and Espresso buttons simultaneously and wait for the LEDs to go dark. Alternatively, wait until the auto shut-off engages—the default setting is 9 minutes, although you can set it for 30 minutes by following the procedure listed in the user guide.
- Once you reset the machine to its default settings, the auto shut-off will engage after 9 minutes of disuse, even if you previously set it for 30 minutes.
- The Espresso button has a picture of a small coffee cup on it; the Lungo has a bigger coffee cup.
2 Press and hold the Lungo button for 5 seconds. After confirming that the machine is off, push down on the Lungo button located on the top of the Citiz or Essenza Mini. Count off 5 seconds while continuing to hold down the button.
- Both the Citiz and Essenza Mini have only 2 buttons: Espresso, which brews a 40 ml (1.4 fl oz) cup under default operation, and Lungo, which makes a 110 ml (3.7 fl oz) cup as its default.
Advertisement
3 Watch for the LEDs to blink fast 3 times, then more slowly. The 3 fast blinks indicate that the machine has been reset to its defaults for brew size and shut-off time. The slow blinking that follows shows that the machine is warming up for operation. Your Citiz or Essenza Mini is ready to brew once the LEDs illuminate steadily.
- If you don’t want to use the machine right now, turn it back off by pressing both buttons at the same time.
- If you want to change the default brew size and auto shut-off settings in the future, follow the instructions in the user guide.

1 Press the Lungo and Espresso buttons to turn the machine off. If none of the LEDs on the machine are lit up, that means the Lattissima One is already off and you can skip this step. Otherwise, hold down both the Lungo button (with the big coffee cup picture on it) and Espresso button (with the small coffee cup picture) on the top of the machine for 2 seconds. Let go once all the LEDs go out.
2 Remove the milk jug by pulling it straight outward. When looking at the front of the machine, the milk jug sticks out just to the right of the coffee dispenser. Grab onto the jug and pull straight outward to remove it. Set it aside for the time being.
- If you don’t remove the milk jug, the machine may try to dispense milk instead of taking you to the factory reset mode!
3 Turn on the machine by pressing any of its 3 buttons. Any of the 3 buttons on the top of the machine—Lungo, Espresso, or Milk—will do the job. The LEDs in all the buttons will begin to blink, indicating that the Latissima One is on and warming up for brewing.
- The LEDs will blink for about 25 seconds while the machine warms up, then light up steadily when it’s ready to brew. You don’t have to wait for the machine to warm up fully before proceeding, however.
4 Press the Milk button until the Descale and Clean indicators blink. Hold the Milk button for 3 seconds to enter Menu mode. You’ll know you’re in Menu mode when both the Descale and Clean LED indicators, which are positioned right above the 3 buttons on top of the machine, blink.
- Let go of the Milk button once you see the indicators blink.
5 Push the Milk button twice more and watch the LEDs for confirmation. After the Descale and Clean indicators blink and you let go of the Milk button, go ahead and press the Milk button again. When the Milk button’s LED blinks, let go of the button once again. Then, press it one last time and watch for all 3 buttons to blink 3 times.
- These 3 last blinks indicate that the Lattissima One has been reset to its factory settings. This primarily impacts the amount of coffee dispensed—40 ml (1.4 fl oz) for Espresso, 110 ml (3.7 fl oz) for Lungo, and 40 ml (1.4 fl oz) of coffee when using the Milk button—and the auto shut-off time—9 minutes.

1 Press the lever down for 3 seconds to turn off the machine, if needed. This is the lever on the front of the machine that you lift up in order to insert a coffee capsule. After 3 seconds, watch for the green LED indicator on the top of the machine to shut off.
- Skip this step if the machine is already off.
2 Push both the lever and the brew button down for 3 seconds. Push down on both simultaneously until you see the button’s LED light up in orange. This steady-on orange LED shows that you’ve entered the Special Functions menu.
- The Vertuo Plus is designed for simplicity of use, so it only has 1 lever on the front and 1 button on the top.
3 Press the lever down completely 3 times in a row. Doing so puts the Vertua Plus into its Factory Reset mode. Watch for the LED on the button to blink orange rapidly—about 3 times every 2 seconds—to confirm that you’re in Factory Reset mode.
- Complete the following (and final) step within 2 minutes, or the machine will automatically exit its Factory Reset mode.
4 Press the blinking button to reset the device to factory settings. When you push the button, it will go from blinking orange quickly to blinking orange more slowly—1 time per second for 3 seconds. Then, the button’s LED will switch to green and remain on. This confirms that the factory reset is complete and the Vertua Plus is ready to brew.
- Under factory settings, the dispensing sizes are as follows: Alto, 414 ml (14.0 fl oz); Coffee, 230 ml (7.8 fl oz); Espresso, 40 ml (1.4 fl oz). The auto shut-off time is set at 9 minutes.

1 Press and hold the Lungo and Espresso buttons to turn off the machine. These buttons are located on the top of the Prodigio. After 3 seconds, all LEDs on the machine will turn off, indicating that the machine is off.
- Skip this step if the machine is already off.
- The Lungo button has a large coffee cup symbol on it, while the Espresso has a small coffee cup symbol.
2 Press the same buttons again, this time for 5 seconds. After 5 seconds of holding down both the Lungo and Espresso buttons, all LEDs on the machine will blink once. This indicates that the machine has now been reset to factory settings, which include the following:
- Serving sizes: Lungo, 110 ml (3.7 fl oz); Espresso, 40 ml (1.4 fl oz); Ristretto, 25 ml (0.85 fl oz).
- Auto shut-off time: 9 minutes.
- Water hardness setting: Hard.
- Pairing with mobile phone: Unpaired.
3 Use your phone if you only want to unpair the Prodigio. Doing the full factory reset unpairs the Prodigio from your phone, but it also changes other settings that you may want to keep the same. If you simply want to remove the pairing between your mobile phone and the machine, open the Nespresso app on your phone and do the following:
- Click on the named machine (if you’re paired with multiple Nespresso models, make sure you click the name for this Prodigio machine).
- Click on “Machine status.”
- Click on “Unpair this machine.”
- Click on “Unpair this device” to confirm.

1 Select the Settings option on the Creatitsa’s display screen. The Creatitsa is one of the few Nespresso model lines that includes a display screen, which makes resetting the machine a more straightforward process. With the machine on, turn the selection dial (located below the screen) until the Settings option is highlighted, then press down on the selection dial.
- If your Creatitsa is off, press the Start/Cancel button located next to the selection dial to turn on the machine.
2 Choose the Reset and then Factory Reset options on the screen. Use the dial to highlight the Reset option in the Settings menu, then press down on the dial. Highlight the Factory Reset option on the new menu that appears, then press down on the dial again.
- If you only want to reset the drink size settings, choose the Coffee Reset option on the second menu instead.
3 Confirm your selection and allow the machine to restart. Highlight the checkmark (✓) symbol and press down on the selection dial to confirm the factory reset. The machine will automatically shut down and reboot with its original factory settings.
- The same checkmark will appear if you’re only resetting the drink size settings. The machine will not shut down and reboot in this case, however.
- If you change your mind at the last minute, select the cancel option (indicated by an X) instead of the checkmark.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Unplugging your Nespresso machine and plugging it back in will not restore it to its factory settings. You must complete the factory reset as instructed in the product manual.

Thanks for submitting a tip for review! Advertisement Article Summary X To reset your Nespresso Essenza Mini to factory settings, first turn it off. Then, press the Lungo button and hold it down for 5 seconds. The LED lights on your machine will blink quickly 3 times if the reset was successful.

Why is my Nespresso machine not responding?

Machine is not running. During regular Coffee/ Espresso preparation : 1) Unlock the lever and open the machine head to check that a fresh undamaged capsule is inserted in the correct position ; 2) Check that the lever is in ‘LOCKED’ position 3) Check that the water tank is filled.

Why is my Nespresso not working when I press the button?

Check that a fresh capsule is inserted in correct position, that the lever is properly locked and push the button to start. Descale if necessary. Open the machine head and let the capsule be ejected. Then perform a cleaning as per cleaning section.

What is factory reset mode?

Get ready to factory reset – Important: A factory reset erases all your data from your phone. If you’re resetting to fix an issue, we recommend first trying other solutions. Learn how to troubleshoot Android issues, Know Google Account username & password To restore your data after you reset your phone, you must enter security info.

Be sure that you know a Google Account on the phone.
- Open your phone’s Settings app.
- Tap Accounts, If you don’t have the option to tap “Accounts,” get help from your device manufacturer,
- You’ll find a Google Account username.
Be sure that you know the password for the Google Account on the phone. To confirm, sign in to that account on another device or computer. If you don’t remember the password, get sign-in help,
If you’ve set a screen lock, be sure that you know your phone’s PIN, pattern, or password. If you can’t unlock your phone, learn what you can do,

Tip: If you recently reset your Google Account password, wait 24 hours before you perform a factory reset. Back up your data to your Google Account A factory data reset erases your data from the phone. While data stored in your Google Account can be restored, all apps and their data will be uninstalled.

Charge your phone to at least 70%.
Connect your phone to Wi-Fi or your mobile network. When the factory reset completes, you must be connected to sign in to your Google Account.

How do I reset my Nespresso touchscreen?

Reset to factory settings Touch in a single continuous movement the following buttons: Warm Milk Froth ->Cappuccino ->Latte Macchiato ->Lungo ->Espresso ->Ristretto. The Warm Milk Froth button blinks to indicate reset mode. Press it to confirm.

How do you reset a one touch Nespresso machine?

Does unplugging Nespresso reset it?

1 Turn the machine off if it is currently on. To turn your Citiz or Essenza Mini model off immediately, press both the Lungo and Espresso buttons simultaneously and wait for the LEDs to go dark. Alternatively, wait until the auto shut-off engages—the default setting is 9 minutes, although you can set it for 30 minutes by following the procedure listed in the user guide.
- Once you reset the machine to its default settings, the auto shut-off will engage after 9 minutes of disuse, even if you previously set it for 30 minutes.
- The Espresso button has a picture of a small coffee cup on it; the Lungo has a bigger coffee cup.
2 Press and hold the Lungo button for 5 seconds. After confirming that the machine is off, push down on the Lungo button located on the top of the Citiz or Essenza Mini. Count off 5 seconds while continuing to hold down the button.
- Both the Citiz and Essenza Mini have only 2 buttons: Espresso, which brews a 40 ml (1.4 fl oz) cup under default operation, and Lungo, which makes a 110 ml (3.7 fl oz) cup as its default.
Advertisement
3 Watch for the LEDs to blink fast 3 times, then more slowly. The 3 fast blinks indicate that the machine has been reset to its defaults for brew size and shut-off time. The slow blinking that follows shows that the machine is warming up for operation. Your Citiz or Essenza Mini is ready to brew once the LEDs illuminate steadily.
- If you don’t want to use the machine right now, turn it back off by pressing both buttons at the same time.
- If you want to change the default brew size and auto shut-off settings in the future, follow the instructions in the user guide.

1 Press the Lungo and Espresso buttons to turn the machine off. If none of the LEDs on the machine are lit up, that means the Lattissima One is already off and you can skip this step. Otherwise, hold down both the Lungo button (with the big coffee cup picture on it) and Espresso button (with the small coffee cup picture) on the top of the machine for 2 seconds. Let go once all the LEDs go out.
2 Remove the milk jug by pulling it straight outward. When looking at the front of the machine, the milk jug sticks out just to the right of the coffee dispenser. Grab onto the jug and pull straight outward to remove it. Set it aside for the time being.
- If you don’t remove the milk jug, the machine may try to dispense milk instead of taking you to the factory reset mode!
3 Turn on the machine by pressing any of its 3 buttons. Any of the 3 buttons on the top of the machine—Lungo, Espresso, or Milk—will do the job. The LEDs in all the buttons will begin to blink, indicating that the Latissima One is on and warming up for brewing.
- The LEDs will blink for about 25 seconds while the machine warms up, then light up steadily when it’s ready to brew. You don’t have to wait for the machine to warm up fully before proceeding, however.
4 Press the Milk button until the Descale and Clean indicators blink. Hold the Milk button for 3 seconds to enter Menu mode. You’ll know you’re in Menu mode when both the Descale and Clean LED indicators, which are positioned right above the 3 buttons on top of the machine, blink.
- Let go of the Milk button once you see the indicators blink.
5 Push the Milk button twice more and watch the LEDs for confirmation. After the Descale and Clean indicators blink and you let go of the Milk button, go ahead and press the Milk button again. When the Milk button’s LED blinks, let go of the button once again. Then, press it one last time and watch for all 3 buttons to blink 3 times.
- These 3 last blinks indicate that the Lattissima One has been reset to its factory settings. This primarily impacts the amount of coffee dispensed—40 ml (1.4 fl oz) for Espresso, 110 ml (3.7 fl oz) for Lungo, and 40 ml (1.4 fl oz) of coffee when using the Milk button—and the auto shut-off time—9 minutes.

1 Press the lever down for 3 seconds to turn off the machine, if needed. This is the lever on the front of the machine that you lift up in order to insert a coffee capsule. After 3 seconds, watch for the green LED indicator on the top of the machine to shut off.
- Skip this step if the machine is already off.
2 Push both the lever and the brew button down for 3 seconds. Push down on both simultaneously until you see the button’s LED light up in orange. This steady-on orange LED shows that you’ve entered the Special Functions menu.
- The Vertuo Plus is designed for simplicity of use, so it only has 1 lever on the front and 1 button on the top.
3 Press the lever down completely 3 times in a row. Doing so puts the Vertua Plus into its Factory Reset mode. Watch for the LED on the button to blink orange rapidly—about 3 times every 2 seconds—to confirm that you’re in Factory Reset mode.
- Complete the following (and final) step within 2 minutes, or the machine will automatically exit its Factory Reset mode.
4 Press the blinking button to reset the device to factory settings. When you push the button, it will go from blinking orange quickly to blinking orange more slowly—1 time per second for 3 seconds. Then, the button’s LED will switch to green and remain on. This confirms that the factory reset is complete and the Vertua Plus is ready to brew.
- Under factory settings, the dispensing sizes are as follows: Alto, 414 ml (14.0 fl oz); Coffee, 230 ml (7.8 fl oz); Espresso, 40 ml (1.4 fl oz). The auto shut-off time is set at 9 minutes.

1 Press and hold the Lungo and Espresso buttons to turn off the machine. These buttons are located on the top of the Prodigio. After 3 seconds, all LEDs on the machine will turn off, indicating that the machine is off.
- Skip this step if the machine is already off.
- The Lungo button has a large coffee cup symbol on it, while the Espresso has a small coffee cup symbol.
2 Press the same buttons again, this time for 5 seconds. After 5 seconds of holding down both the Lungo and Espresso buttons, all LEDs on the machine will blink once. This indicates that the machine has now been reset to factory settings, which include the following:
- Serving sizes: Lungo, 110 ml (3.7 fl oz); Espresso, 40 ml (1.4 fl oz); Ristretto, 25 ml (0.85 fl oz).
- Auto shut-off time: 9 minutes.
- Water hardness setting: Hard.
- Pairing with mobile phone: Unpaired.
3 Use your phone if you only want to unpair the Prodigio. Doing the full factory reset unpairs the Prodigio from your phone, but it also changes other settings that you may want to keep the same. If you simply want to remove the pairing between your mobile phone and the machine, open the Nespresso app on your phone and do the following:
- Click on the named machine (if you’re paired with multiple Nespresso models, make sure you click the name for this Prodigio machine).
- Click on “Machine status.”
- Click on “Unpair this machine.”
- Click on “Unpair this device” to confirm.

1 Select the Settings option on the Creatitsa’s display screen. The Creatitsa is one of the few Nespresso model lines that includes a display screen, which makes resetting the machine a more straightforward process. With the machine on, turn the selection dial (located below the screen) until the Settings option is highlighted, then press down on the selection dial.
- If your Creatitsa is off, press the Start/Cancel button located next to the selection dial to turn on the machine.
2 Choose the Reset and then Factory Reset options on the screen. Use the dial to highlight the Reset option in the Settings menu, then press down on the dial. Highlight the Factory Reset option on the new menu that appears, then press down on the dial again.
- If you only want to reset the drink size settings, choose the Coffee Reset option on the second menu instead.
3 Confirm your selection and allow the machine to restart. Highlight the checkmark (✓) symbol and press down on the selection dial to confirm the factory reset. The machine will automatically shut down and reboot with its original factory settings.
- The same checkmark will appear if you’re only resetting the drink size settings. The machine will not shut down and reboot in this case, however.
- If you change your mind at the last minute, select the cancel option (indicated by an X) instead of the checkmark.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Unplugging your Nespresso machine and plugging it back in will not restore it to its factory settings. You must complete the factory reset as instructed in the product manual.

Sara Olander